A
-
Abedinejad, Mohammad Sadegh
Influence of number of laminar flame lets and their scalar dissipation rate on combustion characteristics in a gas turbine model combustor [Volume 6, Issue 2, 2017, Pages 55-71]
-
Adami, Mahmoud
Multi-objective 3d optimization of film cooling configurations in a high pressure vane based on genetic algorithm -artificial neural network [Volume 6, Issue 3 (special Issue), 2018, Pages 117-128]
-
Alizadeh, Ali
Differential sensitivity analysis of a 3-DOF vibratory rate micro gyroscope [Volume 6, Issue 1, 2017, Pages 121-130]
-
Ansari, Mohammad Ali
Evaluation of the effects of the intruder's behavioral change on the spatiotemporal coverage [Volume 6, Issue 3 (special Issue), 2018, Pages 19-27]
-
Ashrafi, Ali
Leader-follower formation control OF UAVs by PID-fuzzy [Volume 6, Issue 3 (special Issue), 2018, Pages 29-40]
-
Askari, Abdorreza
Leader-follower formation control OF UAVs by PID-fuzzy [Volume 6, Issue 3 (special Issue), 2018, Pages 29-40]
-
Azarakhsh, Sajad
Numerical and experimental investigations of axial and oblique crushing of bitubular conical tubes under clamped boundary condition [Volume 6, Issue 1, 2017, Pages 67-79]
-
Azimi, Meysam
Compensation of randomly delayed and lost measurements in line of sight guidance law by adaptive Kalman filter [Volume 6, Issue 2, 2017, Pages 103-114]
-
Azimirad, Vahid
Differential sensitivity analysis of a 3-DOF vibratory rate micro gyroscope [Volume 6, Issue 1, 2017, Pages 121-130]
B
-
Babaei, Ali-Reza
Design of nonlinear optimal guidance law for high maneuver targets based on state dependent Riccati equation [Volume 6, Issue 1, 2017, Pages 93-107]
-
Bazdidi Tehrani, Farzad
Influence of number of laminar flame lets and their scalar dissipation rate on combustion characteristics in a gas turbine model combustor [Volume 6, Issue 2, 2017, Pages 55-71]
-
Bighashdel, Arian
Development of analytical solution for dynamic behavior of elastic flapping wing under inertial loading [Volume 6, Issue 3 (special Issue), 2018, Pages 7-17]
-
Biglari, Hasan
Transverse vibration of single-layer graphene sheet under 2D magnetic field action by differential quadrature method [Volume 6, Issue 1, 2017, Pages 81-92]
D
-
Dehghan, Seyed Mohammad Mehdi
Heuristic optimization of multi-agent persistent surveillance revisit time by minimum distance weight functions [Volume 6, Issue 2, 2017, Pages 129-141]
-
Dehghan, Seyyed Mohammad Mehdi
Evaluation of the effects of the intruder's behavioral change on the spatiotemporal coverage [Volume 6, Issue 3 (special Issue), 2018, Pages 19-27]
-
Dehghani, Reza
Enhanced backstepping controller design as adaptive and robust for quadrotors [Volume 6, Issue 1, 2017, Pages 109-120]
-
Derikvandi, Saman
Numerical and experimental investigations of axial and oblique crushing of bitubular conical tubes under clamped boundary condition [Volume 6, Issue 1, 2017, Pages 67-79]
-
Dindarlou, Vahid
Investigation of arc model adhesive joint strength in the cap of a composite tank [Volume 6, Issue 3 (special Issue), 2018, Pages 55-63]
E
-
Ershadi, Ali
NOx Formation Reduction Using Primary Aeration in a Swirl Stabilizer Combustor [Volume 6, Issue 1, 2017, Pages 41-51]
-
Esmaeili, Arezoo
Transverse vibration of single-layer graphene sheet under 2D magnetic field action by differential quadrature method [Volume 6, Issue 1, 2017, Pages 81-92]
-
Ettehadi, Hossein
The impact of the changes in the generalized fluid dynamics equation on the two dimensional shear-free turbulent mixing layer [Volume 6, Issue 3 (special Issue), 2018, Pages 105-115]
F
-
Fathali, Mani
The impact of the changes in the generalized fluid dynamics equation on the two dimensional shear-free turbulent mixing layer [Volume 6, Issue 3 (special Issue), 2018, Pages 105-115]
-
Fazeli, Hamid
Investigation & simulation of Nanoparticle application in satellite equipment cooling; simultaneous use of Nano fluid and a heat pipe with three evaporators [Volume 6, Issue 2, 2017, Pages 41-54]
-
Fazlikhani, Saeed
Experimental and numerical investigation on hydrodynamic of spiral atomizer and presenting of compatible solution parameters with spray characteristics [Volume 6, Issue 1, 2017, Pages 7-23]
G
-
Ghajar, Arsalan
An experimental investigation in effects of side slip on static aerodynamics specifications and longitudinal dynamics measurements of a delta wing airplane model [Volume 6, Issue 3 (special Issue), 2018, Pages 77-92]
-
Ghamarian, Ali
Numerical and experimental investigations of axial and oblique crushing of bitubular conical tubes under clamped boundary condition [Volume 6, Issue 1, 2017, Pages 67-79]
-
Gholami, Amir
Leader-follower formation control OF UAVs by PID-fuzzy [Volume 6, Issue 3 (special Issue), 2018, Pages 29-40]
H
-
Haddadpour, Hasan
Development of analytical solution for dynamic behavior of elastic flapping wing under inertial loading [Volume 6, Issue 3 (special Issue), 2018, Pages 7-17]
-
Haghighi, Hassan
Heuristic optimization of multi-agent persistent surveillance revisit time by minimum distance weight functions [Volume 6, Issue 2, 2017, Pages 129-141]
-
Hashempour, Mahmoud
Conceptual design & optimization of high altitude airship by genetic algorithm [Volume 6, Issue 1, 2017, Pages 131-149]
J
-
Jamal-Omidi, Majid
Investigating the nonlinear free vibrations of Nanocomposite beam based on multiscale modeling [Volume 6, Issue 3 (special Issue), 2018, Pages 65-75]
-
JozvVaziri, Mohammad Ali
Developed of an algorithm for design and construction a hot gas thruster and compared with experimental results [Volume 6, Issue 2, 2017, Pages 73-86]
K
-
Kamali Moghadam, Ramin
Assessment of the URANS algorithm in unsteady turbulence modeling of a jet in cross flow [Volume 6, Issue 2, 2017, Pages 25-39]
-
Karimi, Jalal
Heuristic optimization of multi-agent persistent surveillance revisit time by minimum distance weight functions [Volume 6, Issue 2, 2017, Pages 129-141]
-
Khalili, Seyed Mohammad Reza
Experimental and numerical investigations of lattice geometry on the modal response of cylindrical composite lattice structures [Volume 6, Issue 2, 2017, Pages 143-151]
M
-
Madani, Sajedeh
Investigation & simulation of Nanoparticle application in satellite equipment cooling; simultaneous use of Nano fluid and a heat pipe with three evaporators [Volume 6, Issue 2, 2017, Pages 41-54]
-
Mahboobi Esfanjani, Reza
Compensation of randomly delayed and lost measurements in line of sight guidance law by adaptive Kalman filter [Volume 6, Issue 2, 2017, Pages 103-114]
-
Mahdian, Asghar
Structural optimization of missile vertical launch bed launching from the ground using finite element method [Volume 6, Issue 1, 2017, Pages 53-65]
-
Mahdizadeh Rokhi, Masoud
Stress intensity factor calculation in orthotropic functionally graded layers using element-free Galerkin method [Volume 6, Issue 3 (special Issue), 2018, Pages 41-54]
-
Marvi, Morteza
Reduced order model of inverse shape design and flow field analysis using combined form of geometrical and flow modes based on proper orthogonal decomposition [Volume 6, Issue 3 (special Issue), 2018, Pages 93-103]
-
Masdari, Mehran
An experimental investigation in effects of side slip on static aerodynamics specifications and longitudinal dynamics measurements of a delta wing airplane model [Volume 6, Issue 3 (special Issue), 2018, Pages 77-92]
-
Mirzaei, Masoud
The impact of the changes in the generalized fluid dynamics equation on the two dimensional shear-free turbulent mixing layer [Volume 6, Issue 3 (special Issue), 2018, Pages 105-115]
-
Mirzaei, Sajad
Influence of number of laminar flame lets and their scalar dissipation rate on combustion characteristics in a gas turbine model combustor [Volume 6, Issue 2, 2017, Pages 55-71]
-
Moayyedi, Mohammad Kazem
Reduced order model of inverse shape design and flow field analysis using combined form of geometrical and flow modes based on proper orthogonal decomposition [Volume 6, Issue 3 (special Issue), 2018, Pages 93-103]
-
Mohammadi, Masoud
Development of an interface tracking algorithm for numerical simulation of stratified two-phase flow using a finite volume, pressure-based method [Volume 6, Issue 2, 2017, Pages 7-24]
-
Mortazavi, Mahdi
Leader-follower formation control OF UAVs by PID-fuzzy [Volume 6, Issue 3 (special Issue), 2018, Pages 29-40]
-
Mortazavi Manesh, Mohammad Hadi
Structural optimization of missile vertical launch bed launching from the ground using finite element method [Volume 6, Issue 1, 2017, Pages 53-65]
-
Mostofizadeh, Ali Reza
Multi-objective 3d optimization of film cooling configurations in a high pressure vane based on genetic algorithm -artificial neural network [Volume 6, Issue 3 (special Issue), 2018, Pages 117-128]
-
Mousavi Nainiyan, Seead Mojtaba
Experimental determination of the suitable rang of injectors used in the vortex combustion chamber in liquid rocket engine [Volume 6, Issue 1, 2017, Pages 25-39]
N
-
Nazari, Mohammad Bagher
Stress intensity factor calculation in orthotropic functionally graded layers using element-free Galerkin method [Volume 6, Issue 3 (special Issue), 2018, Pages 41-54]
-
Nikfetrat, Akram
Compensation of randomly delayed and lost measurements in line of sight guidance law by adaptive Kalman filter [Volume 6, Issue 2, 2017, Pages 103-114]
-
Nikranjbar, Abolfath
Motion cueing algorithm design using model predictive control [Volume 6, Issue 2, 2017, Pages 115-128]
-
Nosratollahi, Mehran
Conceptual design & optimization of high altitude airship by genetic algorithm [Volume 6, Issue 1, 2017, Pages 131-149]
P
-
Pourtakdoust, Seyed Hossein
Development of analytical solution for dynamic behavior of elastic flapping wing under inertial loading [Volume 6, Issue 3 (special Issue), 2018, Pages 7-17]
R
-
Rahi, Abbas
Numerical and experimental investigations of axial and oblique crushing of bitubular conical tubes under clamped boundary condition [Volume 6, Issue 1, 2017, Pages 67-79]
-
Rahim mashaei, Payam
Investigation & simulation of Nanoparticle application in satellite equipment cooling; simultaneous use of Nano fluid and a heat pipe with three evaporators [Volume 6, Issue 2, 2017, Pages 41-54]
-
Rajabi-ZargarAbadi, Mehran
NOx Formation Reduction Using Primary Aeration in a Swirl Stabilizer Combustor [Volume 6, Issue 1, 2017, Pages 41-51]
-
Riazi, Roozbeh
Development of an interface tracking algorithm for numerical simulation of stratified two-phase flow using a finite volume, pressure-based method [Volume 6, Issue 2, 2017, Pages 7-24]
S
-
Sabour, Mohammad Hossein
Development of an interface tracking algorithm for numerical simulation of stratified two-phase flow using a finite volume, pressure-based method [Volume 6, Issue 2, 2017, Pages 7-24]
-
Sadati, Seyed Hossein
Heuristic optimization of multi-agent persistent surveillance revisit time by minimum distance weight functions [Volume 6, Issue 2, 2017, Pages 129-141]
-
Setayandeh, Seyyed Mohammad Reza
Design of nonlinear optimal guidance law for high maneuver targets based on state dependent Riccati equation [Volume 6, Issue 1, 2017, Pages 93-107]
-
Seyed Shams Taleghani, Seyed Arash
An experimental investigation in effects of side slip on static aerodynamics specifications and longitudinal dynamics measurements of a delta wing airplane model [Volume 6, Issue 3 (special Issue), 2018, Pages 77-92]
-
Shafaee, Maziyar
Experimental and numerical investigation on hydrodynamic of spiral atomizer and presenting of compatible solution parameters with spray characteristics [Volume 6, Issue 1, 2017, Pages 7-23]
-
Shahdad, Mohammad Hossein
Multi-objective 3d optimization of film cooling configurations in a high pressure vane based on genetic algorithm -artificial neural network [Volume 6, Issue 3 (special Issue), 2018, Pages 117-128]
-
Shahriari, Behrooz
Structural optimization of missile vertical launch bed launching from the ground using finite element method [Volume 6, Issue 1, 2017, Pages 53-65]
-
Shahryari, Mehran
Investigation & simulation of Nanoparticle application in satellite equipment cooling; simultaneous use of Nano fluid and a heat pipe with three evaporators [Volume 6, Issue 2, 2017, Pages 41-54]
-
Shariati, Mahmoud
Stress intensity factor calculation in orthotropic functionally graded layers using element-free Galerkin method [Volume 6, Issue 3 (special Issue), 2018, Pages 41-54]
-
ShayanMehr, Mahdi
Investigating the nonlinear free vibrations of Nanocomposite beam based on multiscale modeling [Volume 6, Issue 3 (special Issue), 2018, Pages 65-75]
-
Shokrollahi, Saeed
Investigating the nonlinear free vibrations of Nanocomposite beam based on multiscale modeling [Volume 6, Issue 3 (special Issue), 2018, Pages 65-75]
-
Soltani, Mohammad Reza
An experimental investigation in effects of side slip on static aerodynamics specifications and longitudinal dynamics measurements of a delta wing airplane model [Volume 6, Issue 3 (special Issue), 2018, Pages 77-92]
T
-
Taei, Hojat
Survey of hardware-based satellite attitude dynamics simulators [Volume 6, Issue 2, 2017, Pages 87-101]
V
-
Vakilipour, Shidvash
Development of an interface tracking algorithm for numerical simulation of stratified two-phase flow using a finite volume, pressure-based method [Volume 6, Issue 2, 2017, Pages 7-24]
-
Valizadeh, Esmaeil
Experimental determination of the suitable rang of injectors used in the vortex combustion chamber in liquid rocket engine [Volume 6, Issue 1, 2017, Pages 25-39]
Z
-
Zakeri, Mahnaz
Investigation of arc model adhesive joint strength in the cap of a composite tank [Volume 6, Issue 3 (special Issue), 2018, Pages 55-63]
-
Zakeri, Manizhe
Differential sensitivity analysis of a 3-DOF vibratory rate micro gyroscope [Volume 6, Issue 1, 2017, Pages 121-130]
-
Zamani, Mohammad Reza
Experimental and numerical investigations of lattice geometry on the modal response of cylindrical composite lattice structures [Volume 6, Issue 2, 2017, Pages 143-151]
-
Zare, Hadi
Development of analytical solution for dynamic behavior of elastic flapping wing under inertial loading [Volume 6, Issue 3 (special Issue), 2018, Pages 7-17]
Your query does not match with any item